What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
09.06.2025 06:04
what exactly is a ‘surge’ protector?
This is 'the assistant's answer'
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Meta buys a nuclear power plant (more or less) - TechCrunch
[image of Common-mode choke]
A fuse is a non-resetable over current circuit protector.
At least they know the answer if they wanted it.
Is heroin really as good as people say it is?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
(Dc diagram shown, AC is similar).
My Husband Drinks a Pot of Coffee a Day—So I Asked the Experts If That's Safe - EatingWell
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
I post the exact comment here.
How do the youth in Taiwan perceive their national identity in relation to China?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
At one ohm, the resistor has a maximum of 1 watt power.
Ask Ethan: What would the Universe be like without dark matter? - Big Think
These devices are installed between the “hot” and “neutral” and protective ground.
What does a fuse do?
He then describes the function of a fuse.
JPMorgan’s Jamie Dimon Sees Bond Market Crack — Why And What To Do - Forbes
There are three different concepts here that are getting confused.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
For this case there are devices called Metal oxide varistors (MOV).
Upcoming Telescope Predicted to Discover Millions of Hidden Solar System Objects - Gizmodo
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
but I think this circuit , shows a few more pieces.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Here's Where Traders Expect Broadcom Stock to Go After Earnings - Investopedia
But it can get overloaded, and no longer works.
First Sentence:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Unclear if rock bottom, but Braves hit it anyway in 11-10 stunner loss - Battery Power
This device then solves the entire problem.
This is where this question deviates from being a 'generic' question, and becomes more specific.
The other is “what does a “fuse” do?”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
a photo is worth a thousand words.
Edit 2024–10.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The bolt then partially travels down the line to your home.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Now when you have a certain ac resistance, then a current flows in a loop.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
the problem then depends on "how fast does the fuse operate?".
An AC voltage/ current source, and an ac inductive load.
2024–10–10[John johnson John Johnson ]
Here is a simplified AC power diagram.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This one hit behind the barn.
But… the neutral is now “floating” because of the 1 ohm resistance.
so, what happens?
2024–10–16 [ OO OLAOYE OYEBODE ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
These are simplified answers to the original question, and does not change anything I wrote above.
Because the load is inductive, the current lags the voltage.(by a bit).
It seems Mohan does not understand the difference between a comment and an Answer.
There are two important concepts here.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
In schematic diagrams this is the symbol for a fuse:
Barnstars:
eight
What is lightning?
The third is lightning and “how it gets conducted into a home.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where the MOV conducts again, and dissipated the energy.
It also is a device that limits the change in current flow.
[old diagram got deleted by accident]
Upvotes:
One is “what exactly is in a ‘surge protector’ ? ”
One
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
A circuit breaker is similar, but is resettable.
but this device (an Inductor) … impedes the rapid changes in the current.
He then asserts :
nine
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes Rainy Season and Lightning.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.